IBR R Panel Tr4 Tr5 Roofing Machine-Double layer roof sheet making machine-roll forming machine-geitgroup

DESCRIPTION PARAMETER VIDEO PICTURE Q&A

Product Features

产品描述.png

Double Layer Trapezoid Roof Sheet Forming Machine IBR R Panel Tr4 Tr5 Roofing Machine

Double layer heavy and strong roof sheet roll forming machine is a cold forming equipment that can produce two different types of tiles, suitable for customers with limited space, but can only produce one shape of tile at a time.

The type of tile can be customized according to the customer's needs. Two layer step tile corrugated arc machine is equipped with a clutch device, with this device, the upper and lower layers of the machine will not work

at the same time, which can reduce the wear of the drum, and the life of the machine will be longer.

Features of double layer tile press:

1. One machine can produce Two Types of trapezoidal sheet.

2. One machine can use both 1220mm width coil and 1250mm width coil.

3. This machine has felt device,which can attach the felt on the sheet.

4. The finished product is absolutely flat after cut.

5. The voltage of this machine is 230V,50HZ,Single phase.

IBR R Panel Tr4 Tr5 roofing machine

Profile drawing for reference:

IBR R Panel Tr4 Tr5 roofing machine

产品展示.png

IBR R Panel Tr4 Tr5 roofing machine

Hydraulic Decoiler

1. Bearing max coil weight: 10tons

2. Automatic degree: Full automatic

3. control system: PLC control panel

4. Brake system: Have

IBR R Panel Tr4 Tr5 roofing machine

Feeding Device

1. guiding roller: One set

2. Feeding thickness: With handwheels easy adjust.

3. rubber rollers: Protect coil surface not damaged in the working of the IBR R Panel Tr4 Tr5 roofing machine

IBR R Panel Tr4 Tr5 roofing machine

Roll Forming Device

1.Work speed: 0-20 m/min

2. Rolling station: 17+18 rolling stations

3. Work power: 7.5 kw

4. Transmission: By gear and Chains with cover

5. Rolling shaft: 45# STEEL 80 mm solid shaft, Tempering treatment to prevent deformed and improve hardness

6. Roller: 0.03mm Chromed treatment and quenched 45# steel

IBR R Panel Tr4 Tr5 roofing machine

Hydraulic cutting system

1. Driving method: By pillar type Cylinder

2. Power: 5.5 kw

3. Cutter material: GB-Cr12

4. Oil tube and wires connection: All the tubes and wires will be marked by the numbers or letters,So that it will be very easy to connect for the new.

IBR R Panel Tr4 Tr5 roofing machine

PLC control system

1. Connection: Aviation plugs easy installation

2. Encode: Omron brand

3. PLC brand: Delta (original)

4. Low pressure electric part: Schneider brand

5. Frequency brand: Delta (original)

Our control systems are all world famous brands, and it is easy to find replacement parts if the double layer trapezoid roof sheet forming machine you buy fails.

包装物流.png

包装.jpg

包装物流.jpg

Updated on January 25, 2024

PARAMETER

产品参数.png

Raw material:Galvanized steel and Pre-painted steel

Raw material thickness:0.3-0.6mm(thickness range shouldn’t be too big)

Felt device:Available

Roller station:17+18 stations

Roller material:45# steel with quenched treatment

Shaft diameter:80mm

Shaft material:45# steel with tempered

Transmission:by chain

Motor power:7.5kw

Machine frame:350H steel welded

Cutting type:Hydraulic cutting

Hydraulic power:5.5kw

Cutting blade material:Cr12 with quenched treatment

Cutting tolerance:+/-1mm

Control system:PLC

VIDEO

PICTURE

IBR R Panel Tr4 Tr5 roofing machine

FAQ

1. How to visit your company?

A:
1.Fly to Beijing airport, By high speed train From Beijing Nan to Cangzhou Xi (1 hour).
2.Fly to Tianjin airport, By high speed train From Tianjin to Cangzhou Xi (0.5 hour).
3.Fly to Shanghai Airport: By high speed train From Shanghai Hongqiao to Cangzhou Xi(4.5 hours), then we can pick up you.
2. Can you be responsible for transport?

A:
Yes, please tell me the destination port or address. we have rich experience in transporting.
3. What will you do if the machine is broken?

A:
We provide 1 year free warranty and free technical support for the whole life of any machine. If the broken parts can't repair, we can send the new parts replace the broken parts freely, but you need pay the express cost by yourself. If it is beyond the warranty period, we can negotiate to solve the problem, and we supply the technical support for the whole life of the roll forming machine.
4. Do you sell only standard machines?

A:
No, most of our machines are customized according to customers specifications, also adopt top brand components.

5. Do you have after-sales support?

A:
Yes, we are happy to provide advice and we also have skilled technicians available across the world.
6. What's your payment terms and delivery time?

A:
30% as the deposit by T/T in advance, 70% as the balance payment by T/T after your inspect the machine well and before delivery. Of course your payment terms are acceptable. After we get down payment, we will arrange production. About 45 workdays for delivery.
7. How can we be assured that you will deliver us quality machine with spare parts ?

A:
1. Customers can come to our factory, or send the technical people to our factory for checking the quality.
2. We can send the technicians to the buyer's factory for the installation of the machine.
8. Can you manufacture the roll forming machine according to my profile drawing or picture of finished product ?

A:
Yes. Our rich experienced technical team can draft the accurate profile drawing, provide the most suitable technical solution for your required roll forming machine.